Firman T07571 - Engine Oil and Lubrication; Adding Engine Oil Procedure; Oil Viscosity Chart; Low Oil Shutdown Feature

English
9
Customer Service: 1-844-FIRMAN1
OPERATION
2, Oil and Gasoline / LPG/ NG
Add Engine Oil
We recommend using FIRMAN SAE 10W-30 API SL oil for best performance. Other high-quality
detergent oils (API SL or higher) are acceptable. Do not use special additives. Ambient temperature
determines the proper oil viscosity for the engine. Use the chart to select the proper oil for the
outdoor temperature range expected.
NOTICE Do not attempt to crank or start the engine before it has been properly filled with the
recommended type and amount of oil. Damage due to operation with no oil will void your warranty.
1. Place generator on a flat, level surface.
2. Clean area around oil fill and remove yellow oil fill cap/dipstick.
3.Wipe dipstick clean.
(H)
DRAIN PLUG
(L)
H
L
Degrees Celsiusº(Outside)
Full Synthetic 5W-30
5W-30
10W-40
10W-30
Degrees Fahrenheitº(Outside)