How to fix a First Alert SFA1150 Clock Radio that won't turn on?
If your First Alert Clock Radio isn't responding, first ensure it's properly connected to a working AC outlet. If it's plugged in but still not powering on, try a different outlet to rule out power issues. Also, check the "AA" batteries; if they're exhausted, replace all four with fresh ones.
Why is there no sound coming from my First Alert Clock Radio?
If you're experiencing low or no sound from your First Alert Clock Radio, first, adjust the VOLUME control to ensure it's not set to minimum. Then, make sure you've properly tuned to your desired radio station. For weak FM reception, extend and rotate the telescopic antenna. If the AM reception is poor, try relocating the entire unit. Finally, ensure the unit is not stuck in Weather Alert Mode; select AM, FM, or WB mode as desired.
What to do if my First Alert SFA1150 doesn't respond to alerts?
If your First Alert Clock Radio isn't responding to alerts, ensure that the S.A.M.E. codes have been programmed correctly. Also, verify that the radio is set to the correct weather channel for your specific area.
Why does my First Alert SFA1150 Clock Radio get hot?
It's normal for your First Alert Clock Radio to get warm after playing at high volume for an extended period. To resolve this, turn the unit off for a while or lower the volume.
Procedure to set the desired alarm time and wake-up source.
Options for receiving alerts from all, single, or multiple counties.
General| Type | Clock Radio |
|---|---|
| Display Type | LED |
| Alarm | Yes |
| Snooze Function | Yes |
| Radio Band | AM/FM |
| Power Source | AC |
| Battery Backup | Yes |
| Alarm Type | Buzzer |
To Next Page