installation
Place the Mattress Pad on the desired location (i.e. top of bed mattress). When
first installing the AquaBed, lay your Mattress Pad flat out on the desired location
for at least 10 minutes before connecting it to the AquaBed Water Heater.
Remove the rubber caps on the hose connectors on the Mattress Pad and
AquaBed Water Heater. Note: Some AquaBed Water Heaters will contain residual
water from Quality Assurance testing.
Connect the Mattress Pad to the AquaBed Water Heater by inserting both hose
connectors on the AquaBed Water Heater. Make sure to secure the connection by
plugging the hose connector in and twisting it clockwise.
Plug the AquaBed Water Heater into a nearby wall outlet.
Upon connection, OFF should appear on the screen.
www.aquabedwarmer.com
5
1
2
3
4
To Next Page
Loading...
Need help?
General