FT-MB164-DC Installation Guide
Data Controller (DC)
Remote Start for Mercedes
2006 - 2009 ML, GL, and R Class
www.compustar.com
888.820.3690
Copyright 2010 Firstech, LLC. | 4
5) Pull down on retaining bars 6) Remove and disconnect COMAND unit
7) Access EIS wiring through opening 8) Make sure the valet switch is off
9) Plug the harness into the rear of the EIS 10) Connect the factory wires to the T-Harness
Starter T-Harness
Factory EIS wiring
External view of EIS module
To Next Page
Loading...
