(Please Check Box)
• Check page 27 for problem codes
• Initial diagnostic road test
• Wheel bearings wear and lubricate
• Wheel alignment (3 front wheels), must be a negative toe in 1 to 5 degrees
• Steering and tilting mechanism. Check that it locks under pressure.
• Wear or damage to tires or wheels
• Bodywork fixtures
• Throttle play and adjustment. Check for full and free movement.
• Bodywork, wheel clearance, lights secure
• Steering bearing for wear. Check for backwards and forwards movement.
• Transaxle mountings are tight
• Handlebar alignment, check for damage
• Motor brush wear
• Motor speed check
• Transaxle play
• Electromagnetic brake operation
• Freewheel operation. Check the problem indicator on the display.
• Check brake holding on slope
• Frame for damage, cracks or corrosion
• General corrosion
• All operational controls work correctly
• Battery condition and charger operation
• Tighten all nuts & bolts
• Check tie rod bolts
• Final road test
• Clean vehicle
• Customer road test & sign off
To Next Page