How to Install the Quingo Docking Station
Lifting Caution: We advise you to seek assistance when lifting Docking Station
components. It is highly recommended that the accompanying DVD is viewed prior to fitting.
It is essential that the Docking Station is fitted safely.
Step 1- Preparing the Car for Installation.
a) Clear the car of all articles and obstructions and ensure it is free of grit and dirt.
b) Remove the back parcel shelf and fold the rear seats as flat as possible.
(Headrests may need to be removed.)
c) Adjust the front passenger and driver seat sliders to a comfortable driving
position. These must not be moved, once set. Note: The backrest angle can be
adjusted at any time.
d) Place the four metal plates in the cargo area where the docking station frame will
be secured.
To Next Page
Loading...