FirstStreet Quingo - Additional Information- Loading with Separated Rails (no Center Bar)

79
Additional Information- Loading with separated rails (no center bar).
When you are loading and unloading the scooter from your vehicle, you may find it harder
to pull both the rails out when they are joined together. It is possible to pull the rails out
individually, but you cannot use the center bar this way (used to line up the scooter when
loading).
A) To remove
the center bar
connecting the
inner rails
together, push
both the ‘click’
buttons.
B) Push the
button up as
shown in the
picture to
release the rails
(L2 and R2).