Step 6.
b) Ensure the remote cable
is full extended and
tangle free. Be careful not
to trap or pull on the
cable.
c) For your safety, never
stand directly behind the
vehicle. It is very
important to stand to one
side of the rails before
loading.
d) Press the silver ‘UP’
button continuously until
the Flyte is fully inside the
car where it will
automatically power
down.
NEVER stand directly behind the vehicle. It is very important to stand to
one side of the rails before loading.
Keep the remote control away from water. When finished with the remote,
place it in the lockable box.
To Next Page
Loading...