FirstStreet Quingo - Page 65

65
Step 7- Fitting the Front seat supports.
a) Go to the front of the L1 and R1 rails (near the driver and passenger seats) and on
each outer rail there is a button to release and adjust the front support arms so they
clear the folded rear seats.
To pull the front horizontal
arms out.
To adjust the length of the
horizontal arms.
b) Now connect the front support arms to the horizontal arms on both L1 and R1 rails.
Connect by pushing the connector into the
front of the horizontal arm.
Connector.
Plate (under front seats).