FISCHER 18093 - Intended Use; Tools Required for Assembly; Parts List for Roof Bike Rack

9
The roof bike rack is used to transport one bicycle on a vehicle roof. The roof bike rack must be
assembled according to these operating instructions. Observe all applicable regulations (max.
speed limit, max. permissible total weight, etc.) when driving.
The following tools are required for assembly:
2 x Ø 10 mm
2. Intended use
3. Tools required for assembly
10 mm
4. Parts list for roof bike rack
Caution:Makesurenochildrenareinthevicinitywhenworkingwiththeseindividual
parts.Thebikerackcontainssmallpartsthatposeachokinghazard!
GB
18093_Betriebsanleitung.indd 9 13.02.15 11:24