14
INSTALLING THE DRAWERINSTALLATION OPTIONS
Connect the power plug into the
power outlet.
Place the warming drawer carefully
inside the cabinetry.
1
Push the warming drawer back
into the cabinetry, and align the
front panel with the cabinetry as
desired.
2
3
Open the drawer and secure the
attachment flanges of the drawer
to the side edges of cabinetry with
4x25 T20 star head countersunk
screws.
PLAN VIEW
PROFILE
This combination is suitable for Minimal 600mm Tall Warming drawer that can fully support
600mm Fisher & Paykel single oven and companion product. A shelf is required above the
oven to support the companion product. Ensure the bottom shelf can fully support the weight
of all appliances.
COMBINED WITH SINGLE OVEN & COMPANION PRODUCT
FRONT
PROFILE
Companion product
Top shelf
Wall oven
Bottom shelf
Warming Drawer
600mm Companion Trim Kit
To Next Page
Loading...
Need help?
General
