24
!9 ATTACH COVERS AND KICKSTRIPS
1 To stabilize the product, lower the
front feet. Turn clockwise to lower feet.
Repeat on the opposite side.
2 Kickstrip filter
Remove filter from inside the product.
Fit the filter onto the rails and push to
the rear until it clips securely.
3 Kickstrip grille
Align clips on the back of the grille with
openings on front face of plinths. Push grille
firmly onto product until it clips securely.
4 For Fisher & Paykel door panel sets,
remove any remaining protective film
from all door panels.
6 Open the refrigerator French doors to
conceal the side screws using side covers.
Firmly push side cover over side screws.
Repeat this process for the freezer drawer.
5 Open the refrigerator French doors to
conceal the outer top studs using top covers.
Firmly push top cover over top door studs.
Repeat this process for the freezer drawer.
To Next Page
Loading...
