Before you do your first wash
You owe it to yoursdf and your AquoSmort _' to have it installed correctly by an authorized
service agent.
Before you start, Jt is a good idea to go through the following checklist:
1 Has the base packer been removed?
2 Is the drain hose threaded through the'U bend' hose guide (with no
more than sa"extended) and hooked on to your standpipe or tub/sink7
s Is the hot hose connected to the hot valve marked'H'?
Is the coM hose connected to the coM valve marked 'C'?
a Is the washer levded correctly, with the feet extended and cabinet
corners dear of the floor? Refer to pages 10 and 11.
s Have you performed the installation test cycle? Refer to page 12,
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY_NSTRUCTIONSoutlined in this
User Guide before operating this appliance, pages 3 - 5o
Failure to do so can result in death, electric shocB fire or injury to
persons°
To Next Page
Loading...
