599266B
6
1. Service requirements
1.1 Health and Safety
When servicing the cooktop, health and safety issues must be considered at all times. Specific
safety issues are listed below with their appropriate icon. They are illustrated in the service
procedures to remind service people of the issues.
Electrical safety. Isolate the cooktop from the electrical supply
before servicing. Failure to do so could result in an electric shock.
Gas leak hazard. Isolate the cooktop from the gas supply if necessary
before servicing and leak test after all gas related repairs.
Sharp metal edges. Take care and use appropriate protection when
handling sharp metal edges to avoid laceration.
Gas fittings are torque sensitive, over tightening could damage them
and cause a gas leak.
Heat hazard. Ensure wiring is correctly routed away from potentially hot
metal parts.
Ensure the work area is clean and tidy at all times to avoid a hazard while
service work is being carried out. Clean the cooktop and tidy the work area
after service work is completed.
1.2 General warning
Qualified gas and electrical service people should only service this product.
To Next Page
Loading...
Need help?
General
