1.888.93 6.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DOUBLE DISHDRAWER
™
DIMENSIONS
DD24DDFX7, DD24DI7, DD24DCX7, DD24DCB7, DD24DCW7
DIMENSIONS INCHES (MM)
DD24DDFX7
DD24DI7
DD24DCX7
DD24DCB7,
DD24DCW7
Designer Integrated
Designer
Classic Black Classic,
White Classic
A overall height of product 2 ⁄ - 4 ⅝” (820-880)
2
2 ⁄ - 4 ⅝” (820-880) 2 ⁄ - 4 ⅝” (820-880) 2 ⁄ - 4 ⅝” (820-880)
B overall width of product 2⁄” (599) 2⁄” (599) 2⁄” (599) 2⁄” (599)
C overall depth of product
(excl. handle)
22 ½” (571) 22 ½” (571)
22 ⁄” (582) 22 ⁄” (582)
D depth of chassis
(to back of front panel)
21 ¾” (55) 21 ¾” (55) 21 ¾” (55) 21 ¾” (55)
E maximum extension of drawer
(excl. handle)
21 ⁄” (545) 21 ⁄” (545) 21 ⅞” (556) 21 ⅞” (556)
F depth of front panel
(excl. handle) ⁄” (18) ⅝ - ⁄” (16-20) 1 ⅛” (29) 1 ⅛” (29)
G height of chassis 1 ⁄” (811) 1 ⁄” (811) 1 ⁄” (811) 1 ⁄” (811)
H height of levelling feet ⅜ - 2 ⁄” (9-69) ⅜ - 2 ⁄” (9-69) ⅜ - 2 ⁄” (9-69) ⅜ - 2 ⁄” (9-69)
I depth of handle 1 ⅝” (41) n⁄a n⁄a n⁄a n⁄a n⁄a n⁄a
J depth of toekick recess
(to back of front panel)
1 ⁄ - ⅝” (0-92) 1 ⁄ - ⁄” (0-84) 1 ⁄ - ⅝” (0-92) 1 ⁄ - ⅝” (0-92)
K height of upper front panel 15 ⁄” (98) min. 15 ⁄” (98) 15 ½ ” (94) 15 ½ ” (94)
L ventilation gap between front panels ⁄” (8) min. ⁄” (8) ⁄” (5) ⁄” (5)
M height of toekick panel
(adjustable) 2 ¾ - 4 ¾” (70-120) 2 ¾ - 4 ¾” (70-120) 2 ¾ - 4 ¾” (70-120) 2 ¾ - 4 ¾” (70-120)
N height of drawer fronts 0” (762) min. 28 ¼” (717) 29 ⁄” (757) 29 ⁄” (757)
O height from top of handle to top
of front panel
2 ½” (64) n/a n/a n/a n/a n/a n/a
includes ⁄” (2mm) high bracket slots depending on adjustment of leveling feet assuming front panel thickness of ⁄” (18mm) adjustable to match toekick recess on adjoining cabinetry
assuming that toekick mounting bracket is used with a ⁄” (18mm) thick custom panel; if recess is between 1 ⁄” - ⁄” (50 and 84 mm) deep, the panel will need to be cut out - see step
‘Custom panel calculations’
I
H
K
M
NA
O
O
G
F
J
L
B
C
E
D
Side
Plan
To Next Page
General
