33
MAINTENANCE
Tub features
1 Drain filter
2 Filter plate
3 Spray arm
Disconnect the DishDrawer™ Dishwasher from the power supply and allow it to cool before
undertaking any cleaning or maintenance.
1
2
3
Cleaning surfaces
Wipe with a damp cloth and dry using a lint-free cloth. Take care not to wet the
LCD display.
We do not recommend using the following cleaning aids as they may damage the surfaces:
z
Plastic or stainless steel scouring pads
z
Abrasive, solvent, household cleaners
z
Acid or alkaline cleaners
Cleaning the drain filter, spray arm and filter plate
We recommend that the drain filter and filter plate in each drawer are removed and cleaned
once a month or whenever there is evidence of food particles. The spray arm in normal use
should require cleaning less frequently. These parts can be shaken to remove any foreign
material, cleaned in hot water, then rinsed in clean water.
The DishDrawer™ Dishwasher must be used with the filter plate, drain filter and spray arm
correctly in place. We recommend that you always use the DishDrawer™ Dishwasher with
the right hand folding tine rack in place.
If a dishwasher cleaner/descaler is used, you must run a wash program with detergent
immediately afterward to prevent any damage to your DishDrawer.
Extended periods of disuse
If the DishDrawer™ Dishwasher is not going to be used for some time we recommend
turning off the power and water supply, leaving it clean and empty with the drawers ajar.
When using your DishDrawer™ Dishwasher for the first time after a long period away,
we recommend pouring 3 cups of water into the drawer before use. This helps lubricate
components that may have dried out during dis-use.
z
Hand washing liquids or soap
z
Stainless steel cleaners or polishes
z
Laundry detergents or disinfectants
To Next Page
Loading...
Need help?
General
