16
13b12b
INTEGRATED ONLY - ATTACH VENTING HOSE PULL THROUGH HOSES & MOVE INTO THE CAVITY
Fitted Elbow
Check that the fitted elbow is
rotated left or right (depending
on the direction of the routing),
then ensure the venting hose is
securely attached to it.
Vent Hose
(Integrated
models only)
vent either
through
same cabinet
or adjacent
cabinet as per
step 9a or 9b
ALTERNATIVE METHOD (b) - SECURE BY DRAWER REMOVAL
As you push product in, pull through hoses and
cord, ensuring they don’t get kinked or twisted.
Important!
If product cannot be pushed in far enough, pull
out again and rearrange hoses and cord. Do not
use excessive force, as doing so may squash the
hoses and lead to incorrect operation.
To Next Page
Loading...
Need help?
General
