Fisher & Paykel DD601v2 - Page 33

- 30 -
Poor Dry
Performance
Rinse aid not
being
dispensed
Check the continuity of
the wiring and pump
solenoid by removing
the connections at the
PCB and testing with a
meter.
Is there rinse aid in
the dispesner?
Check the voltage
(24 Volts dc) at the
PCB.
Not
OK
OK
In Diagnostics, does
the Dispenser pump
run?
Replace dispenser.
Repair wiring or
connection.
Yes
No
Replace the PCB
Not
OK
OK
Replace dispenser.
OK