Fisher & Paykel DD601v2 - Page 32

- 29 -
U3
Has the
dishdrawer
drained?
Check the
rotor/sprayarm
are turning freely
Check for pump
blockage or drain
impellor failure
Possibilty of
electronics incorrectly
sensing the load but
not likely
Free sprayarm
or rotor
Not
OK
OK
No Yes
The motor has sensed
prime too quickly
Has it been
programmed for low
pressure? Refer
Page 14 for
Re-programming.
Check locknut on
filter plate is
locked in
correctly