Delay Start
This leature allows you to delay the start of the wash program from one to twelw,
hours. Itis useh_l ifyouwanttotakeadvantageoftheoffpeak power rates. (Check
with your local Electricity Utility if this is available), or if you wish to start the
DishDrawer at a later time.
To Activate Delay Start
1. Ensure the DishDrawer isclosed.
2. Pressand hold the Start/Pause button. Fhe light above the Start/Pause button
will turn orange.
3. Hold or press the Start/Pause button and the time will increase in increments
of one hour. The DishDrawer will emit a beep for each hour passe{].
4. Release the button when the desired time has been reached.
The DishDrawer will automatically start when the time haselapsed.
To cancel the Delay Start, press the Power button or keep pressing until it passes 12
beeps/hour. Fhe light above Start/ Pause button wi[I turn green when the De[ay Start
has been cancelled.
10
To Next Page
Loading...
