PROBLEM SOLVER
PROBLEM POSSIBLECAUSE
Foamhlg Incorrect amount of
detergent
Dishes not dry
Too much egg yolk
in wash load
Rinse agent setting too high
[ncorrectloading
An Eco Program has been
chosen
Rinse agent depleted
Detergent not
dispensing
Rinse agent setting too low
Detergent was wet when
loaded
Detergent not
dispensing from the
pre wash compartment
Fype of wash program
choson
Water Leaking
Drain hose disconnected
from the waste pipe
Supply inlet hose
not connected properly
Other Leaks
WHAT TO DO
See wash program chart or
consult the manulacturer's
instruction.
Add detergent into the
pre-rinse compartment.
Decrease rinse agent setting.
Ensure the dishes arc, not
nesting together.
Try using the Plus
programs, the wash program
light should be Red.
Refill the rinse agent
dispenser.
Increase rinse agent setting.
Clean the dispenser and
ensure the detergent
dispenser is dry when
putting the detergent in.
When using the Fast Eco
Save program, detergent
should be placed in the
main wash compartment
only.
Reconnect the drain hose.
Securely reconnect the
the inlet hose.
Turn the water and
electricity to your
DishDrawer off. Call your
Fisher & Paykel Authorized
Service Agent.
29
To Next Page
Loading...
