D
D
i
i
s
s
h
h
D
D
r
r
a
a
w
w
e
e
r
r
’
’
s
s
W
W
a
a
s
s
h
h
P
P
r
r
o
o
g
g
r
r
a
a
m
m
m
m
e
e
s
s
WASH PROGRAMMES
There are nine wash programmes available.
Heavy, Heavy Eco, Normal, Normal Eco, Delicate, Delicate Eco, Fast, Fast Eco and Rinse Option.
The following table shows what the wash programmes are designed for
WASH PROGRAMMES WHEN TO USE
Heavy Heavily soiled dishes like for pots and pans, baking dishes
Heavy Eco Heavily soiled everyday dishes
Normal This programme has been optimised for wash and dry
performance
Normal Eco This programme has been optimised for energy usage. It
can be used for normal to lightly soiled dishes
Fast Lightly soiled dishes – glasses, mugs, saucers
Fast Eco Lightly soiled, non greasy dishes
Delicate Lightly soiled heat sensitive crockery
Delicate Eco Non greasy, lightly soiled and heat sensitive crockery
Rinse To prevent soils drying and odours forming.
NOTES:
ECO PROGRAMMES
Eco cycles reduce temperature, water usage and time in some programmes. The exception to the
rule is NORMAL ECO for the European market, this programme is much longer.
The Eco programmes have a reduced final rinse, and reduced drying time, which means dry
performance is reduced.
FAST PROGRAMME
In order to meet customer requirements for a fast wash, this programme just washes dishes, there
is a negligible drying phase, which does not dry the dishes adequately.
NORMAL PROGRAMMES
All NORMAL & NORMAL ECO programmes have been maximised to meet standard requirements.
One of the biggest problems we have in development of wash programmes is meeting both the
consumer and standards needs. In some standards it requires a minimum percentage pass mark for
both wash and dry, while another standard requires the best performance with negligible resources
to be used. This presents problems, as some of the standard soils are particularly hard to remove eg
microwaved milk plus a 2 hour @ 80°C bake. The standards will be discussed later.
SANI WASH – USA only
The Sani wash is the Heavy programme. The final rinse temperature reaches 74°C/165°F.
TIME REMAINING DISPLAY – DD603 and DS603 Prefinished Models Only
This is only an estimate of time remaining. The display is dependant on a number of factors eg,
incoming wash temperatures, ambient room temperatures and whether the drawer has been opened
during mid cycle etc.
To Next Page
Loading...
Need help?
General
