EasyManuals Logo

Fisher & Paykel DD60DC Installation Instructions

Fisher & Paykel DD60DC
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
2 PARTS SUPPLIED
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
Clamp (1)
(for securing
Drain hose joiner)
Wire clip (2)
(for securing
Drain hose joiner)
Phillips
16 mm
screws (9)
Drain hose
support (1)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
Drain hose
joiner (1)
Top
mounting
brackets (2)
OPTIONAL
Prefinished
toekick (1) and
securing pins (4)
Rubber washer
for inlet hose (1)
(comes already
fitted)
Hexagonal
socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL

Other manuals for Fisher & Paykel DD60DC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher & Paykel DD60DC and is the answer not in the manual?

Fisher & Paykel DD60DC Specifications

General IconGeneral
BrandFisher & Paykel
ModelDD60DC
CategoryDishwasher
LanguageEnglish

Related product manuals