What to do if my Fisher & Paykel Dishwasher is leaking water?
If your Fisher & Paykel Dishwasher is leaking water, check the drain hose connection to the waste pipe and ensure it's properly reconnected. Also, verify that the water inlet hose is securely connected. If the leaking persists, turn off the water and power supplies to the DishDrawer® and contact your dealer or an Authorised Service Centre.
Why my Fisher & Paykel Dishwasher leaves dishes wet?
If your Fisher & Paykel Dishwasher isn't drying dishes effectively, make sure that the dishes are not nesting together. Check the rinse aid dispenser and refill if depleted. Also, the rinse aid setting might be too low, so increase it. If you're using the Eco wash programme, switch to a standard wash programme for better drying results.
How to fix a Fisher & Paykel DishDrawer DD60DHI6 that won't start?
If your Fisher & Paykel Dishwasher won't start, first ensure that the power supply is properly connected. Check if the Keylock or Childlock feature is activated; if so, turn it off by holding the button until the light above it disappears. Also, make sure you are pressing the button to start the DishDrawer®.
How to remove water marks from dishes in my Fisher & Paykel Dishwasher?
If you're noticing water marks on dishes from your Fisher & Paykel Dishwasher, it may be due to overloading or incorrect loading. Refer to the loading section for guidance. Also, check the water softener and ensure there is enough salt, increasing the setting if necessary.
What to do if my Fisher & Paykel DishDrawer DD60DHI6 Dishwasher DishDrawer® won't open?
If your Fisher & Paykel Dishwasher DishDrawer® won't open, check if the Childlock feature or the Closed drawer option is activated. Turn the Childlock off by holding down the button until the light above it disappears, and/or press the button to open the DishDrawer®.
Why is there excess water in my Fisher & Paykel DishDrawer DD60DHI6 Dishwasher DishDrawer®?
If you find excess water in your Fisher & Paykel Dishwasher DishDrawer®, check the drain hoses for bends or kinks and straighten them.
Why is my Fisher & Paykel DishDrawer DD60DHI6 beeping intermittently?
If your Fisher & Paykel Dishwasher is beeping intermittently, it is likely in pause mode. To resolve this, close the DishDrawer® and press the button.
How to clean stains inside my Fisher & Paykel DishDrawer DD60DHI6 DishDrawer®?
If the interior of your Fisher & Paykel Dishwasher DishDrawer® is stained, it may be due to some foods, like tomato based products. Pre-rinse dishes before placing them in the DishDrawer®. Alternatively, using the Rinse programme after adding the dishes may minimise staining.
Why is my Fisher & Paykel Dishwasher foaming?
If your Fisher & Paykel Dishwasher is foaming, it could be due to an incorrect amount of detergent. Refer to the detergent section or consult the detergent manufacturer’s instructions. Too much egg in the wash load can also cause foaming, so increase the amount of detergent. Additionally, the rinse aid setting might be too high, so decrease it.
General| Brand | Fisher & Paykel |
|---|---|
| Model | DishDrawer DD60DHI6 |
| Category | Dishwasher |
| Language | English |
Crucial safety guidelines to minimize risks during dishwasher use and operation.
Safety precautions for proper installation, securing the appliance, and safe maintenance procedures.
Key safety rules for operating the DishDrawer®, including child safety and appliance usage.
Explanation of the power, start/pause, delay start, and lock buttons on the control panel.
Guide to selecting wash programmes, including Eco mode and handling power failures.
Step-by-step guide for loading dishes, adding detergent, selecting programs, and starting the wash cycle.
Details of standard wash cycles, temperatures, rinses, and drying phases for different soil levels.
Information on eco-friendly wash cycles, temperatures, and their suitability for energy saving.
Advice on washing cutlery, silverware, metals, wood, glass, plastic, decorated, and glued items.
Instructions for storing the dishwasher when not in use for extended periods.
Overview of IEC 60436 standards, detergent quantities, rinse aid settings, and loading patterns for testing.
Features for cutlery basket, chopstick insert, and stemware notches for optimal dish placement.
Details on adjustable racks, glass supports, and 'slide-and-fold' tines for flexible loading.
Guidelines for arranging dishes to ensure proper water circulation and effective cleaning.
Common mistakes and incorrect loading methods to avoid for optimal wash performance.
Instructions for filling the detergent dispenser for pre-wash and main wash compartments.
Recommended detergent quantities and placement methods for dishwasher tablets.
How to fill, adjust, and indicators for the rinse aid dispenser for optimal drying.
How to determine water hardness and set the appropriate water softener level.
Step-by-step guide to filling the salt reservoir for the water softening system.
Understanding the salt indicator light and important notes on salt usage.
Adjusting rinse aid, water softener, auto power, beeps, and closed drawer options.
Detailed steps for navigating menus and modifying preference settings using control buttons.
Instructions for safely cleaning the appliance's exterior surfaces without damaging them.
Procedures for cleaning the drain filter, spray arm, and filter plate to maintain performance.
Solutions for issues like unclean dishes, foaming, water leaks, and the drawer not opening.
Troubleshooting steps for intermittent beeping, dishes not drying, no detergent, and excessive motor noise.
How to identify fault codes displayed on the panel and general steps to resolve them.
Detailed explanations and actions for specific error codes (F1-F9) and their causes.
Guidance for resolving specific error codes (U1, U4) related to filling and other drawers.
Self-help checks to perform before contacting service or assistance.
Information on the manufacturer, registered importer, and product details for warranty claims.
To Next Page