What to do if my Fisher & Paykel DishDrawer DD60DDFHX6 is leaking water?
If your Fisher & Paykel Dishwasher is leaking water, check the drain hose connection to the waste pipe and ensure it's properly reconnected. Also, verify that the water inlet hose is securely connected. If the leaking persists, turn off the water and power supplies to the DishDrawer® and contact your dealer or an Authorised Service Centre.
Why my Fisher & Paykel Dishwasher leaves dishes wet?
If your Fisher & Paykel Dishwasher isn't drying dishes effectively, make sure that the dishes are not nesting together. Check the rinse aid dispenser and refill if depleted. Also, the rinse aid setting might be too low, so increase it. If you're using the Eco wash programme, switch to a standard wash programme for better drying results.
How to fix a Fisher & Paykel DishDrawer DD60DDFHX6 Dishwasher that won't start?
If your Fisher & Paykel Dishwasher won't start, first ensure that the power supply is properly connected. Check if the Keylock or Childlock feature is activated; if so, turn it off by holding the button until the light above it disappears. Also, make sure you are pressing the button to start the DishDrawer®.
How to remove water marks from dishes in my Fisher & Paykel DishDrawer DD60DDFHX6?
If you're noticing water marks on dishes from your Fisher & Paykel Dishwasher, it may be due to overloading or incorrect loading. Refer to the loading section for guidance. Also, check the water softener and ensure there is enough salt, increasing the setting if necessary.
What to do if my Fisher & Paykel Dishwasher DishDrawer® won't open?
If your Fisher & Paykel Dishwasher DishDrawer® won't open, check if the Childlock feature or the Closed drawer option is activated. Turn the Childlock off by holding down the button until the light above it disappears, and/or press the button to open the DishDrawer®.
Why is there excess water in my Fisher & Paykel Dishwasher DishDrawer®?
If you find excess water in your Fisher & Paykel Dishwasher DishDrawer®, check the drain hoses for bends or kinks and straighten them.
Why is my Fisher & Paykel DishDrawer DD60DDFHX6 beeping intermittently?
If your Fisher & Paykel Dishwasher is beeping intermittently, it is likely in pause mode. To resolve this, close the DishDrawer® and press the button.
How to clean stains inside my Fisher & Paykel DishDrawer DD60DDFHX6 DishDrawer®?
If the interior of your Fisher & Paykel Dishwasher DishDrawer® is stained, it may be due to some foods, like tomato based products. Pre-rinse dishes before placing them in the DishDrawer®. Alternatively, using the Rinse programme after adding the dishes may minimise staining.
Why is my Fisher & Paykel DishDrawer DD60DDFHX6 Dishwasher foaming?
If your Fisher & Paykel Dishwasher is foaming, it could be due to an incorrect amount of detergent. Refer to the detergent section or consult the detergent manufacturer’s instructions. Too much egg in the wash load can also cause foaming, so increase the amount of detergent. Additionally, the rinse aid setting might be too high, so decrease it.
Why is no detergent dispensed in my Fisher & Paykel DishDrawer DD60DDFHX6 Dishwasher?
If no detergent is being dispensed in your Fisher & Paykel Dishwasher, the detergent dispenser may have been wet when loaded, so clean the dispenser and ensure it is dry when adding detergent. Also, the filter plate and/or spray arm might be incorrectly placed; refer to the ‘Care and cleaning’ section for details on correct placement.
General| Model Number | DD60DDFHX6 |
|---|---|
| Number of Drawers | 2 |
| Finish | Stainless Steel |
| Width | 599 mm |
| Depth | 573 mm |
| Water Rating | 4.5 stars |
| Noise Level | 44 dBA |
| Control Type | Electronic |
| Energy Star Certified | Yes |
| Type | DishDrawer |
| Features | Adjustable Rack |
| Drying System | Fan assisted |
| Wash Cycles | Normal, Heavy, Rinse, Eco |
| Delay Start | Yes |
Key precautions for safe operation and to minimize risks of fire, explosion, or injury.
Guidelines for safe installation of the DishDrawer, including securing and power connection.
Precautions for safe cleaning and maintenance, including power disconnection and avoiding hazards.
How to turn the DishDrawer on/off and end a wash program.
Using the Start/Pause button to begin, pause, or restart a wash cycle.
Setting a delayed start for the wash program from 1 to 12 hours.
Disabling/enabling all buttons to prevent accidental operation.
How to select wash programs and the Eco button for energy saving.
What happens to the wash program during a power interruption.
Rinsing cutlery to prevent tarnishing and handling silver items.
Advice for Aluminium, Other Metals, Woodware, Glassware, and Plastic items.
Guidelines for Decorated items, Glued items, and preparing for Holiday time.
Using the cutlery basket, including its sections, chopstick insert, and stemware notches.
Adjusting folding tines for accommodating large bowls and cups.
How to adjust rack height for optimal loading.
Using glass supports and slide-and-fold tines for stability.
Recommended amounts of detergent for different wash programs.
Placement options for dishwasher tablets in the cutlery basket or wash compartment.
How to find local water hardness and set the appropriate Dish Drawer® level.
Step-by-step guide to filling the salt reservoir correctly.
Instructions for refilling the rinse aid dispenser.
Adjusting rinse aid levels and understanding the indicator light.
Adjusting rinse aid and water softener levels based on user needs.
Configuring auto power on/off and end-of-wash programme beeps.
Enabling the drawer lock feature for enhanced security or specific uses.
How to clean the dishwasher surfaces using recommended methods and avoiding harsh cleaners.
Causes and solutions for dishes not coming out clean.
Addressing issues related to excessive foam or water leakage.
Troubleshooting steps for when the dishwasher drawer won't open.
What to do if the dishwasher experiences a power failure during a cycle.
Resolving beeping, start issues, excess water, and motor noise problems.
Addressing water marks, staining, and dishes not drying properly.
How to identify fault codes and the general steps to resolve them.
Self-help steps before contacting service or ordering parts.
Fields to record model, serial number, purchase date, and dealer information.
To Next Page