Cleaning the Spray Arm and Filter Plate
To remove and clean the spray arm and filter plate
1. Unplug the dishwasher or turn it off at the power supply.
2. Unclip the glass supports (if fitted) from the rack wires and fold
all the adjustable racks away, so that they are upright and
close to the top.
3. Remove the base rack carefully. Lift from the back end first to
prevent knocking the detergent and rinse aid dispenser.
4. Lift the spray arm and shake any foreign material out.
Rinse it clean under running water and wipe with a damp
cloth.
5. Lift and remove the drain filter.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCTB7/User_Guide_DD24SCTB7/11_U…
Updated: Tue, 16 Nov 2021 11:52:55 GMT
Powered by
3
To Next Page
Loading...
Need help?
General
