Fisher & Paykel DE6060P1

To Next Page

Cleaning your dryer

When you have finished using your dryer

• Unplug the dryer from the power socket.

• Wipe around the door to remove any remaining condensation and/or foreign matter.

• Clear the lint filter.

Cleaning your dryer

Before you start cleaning your dryer, ensure that it is disconnected from the power (ie unplug the dryer from the power

socket).

Cleaning the control panel and outer surfaces of the dryer

Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or scouring cleaners, as these will

damage the paint and plastic surfaces of your dryer.

Cleaning the inside of your dryer

It is important that you occasionally clean the inside of your dryer. If the drum has any residual dirt or lint stuck to it,

remove this and wipe it clean with a damp cloth. Do not leave any metal objects in the drum, as these may cause rust.

Cleaning the lint filter

• Lint is generally formed during wearing and washing. Fibres (ie lint)

released from the clothes during the drying cycle are collected in the

lint filter.

• It is important to clean the lint filter after every load, as the lint

produced in the drying process can become a fire hazard if it is

allowed to accumulate in or around your dryer.

• The lint filter is located in the door opening (at the bottom).

• There is a warning light that will flash at the beginning of every cycle

to remind you to clean the filter. Lint becomes a fire hazard if left to

build up, and will reduce the efficiency of your dryer.

Lint filter

https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/09_Cleaning_your_dryer

Updated: Wed, 01 Dec 2021 08:58:55 GMT

Other manuals for Fisher & Paykel DE6060P1

Service Manual21 pages

Need help?

Do you have a question about the Fisher & Paykel DE6060P1 and is the answer not in the manual?

Summary

Cleaning Your Dryer

After Using Your Dryer

Unplug the dryer, wipe the door, and clear the lint filter.

Cleaning Dryer Surfaces

Wipe control panel and outer surfaces with a soft damp cloth, then dry. Avoid harsh cleaners.

Cleaning Dryer Interior

Clean the drum with a damp cloth, removing residual dirt or lint. Avoid metal objects.

Cleaning the Lint Filter

Clean the lint filter after every load to prevent fire hazards and maintain efficiency.

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Routine Post-Use Maintenance
General Cleaning Procedures
Lint Filter Cleaning (Detailed Procedure)
Importance of Lint Filter Maintenance
Lint Filter Damage and Replacement

This document provides comprehensive instructions for the cleaning and maintenance of a Fisher & Paykel dryer, specifically the DE6060P1 model. It outlines procedures for both routine post-use cleaning and more in-depth periodic maintenance, emphasizing the importance of proper care for optimal performance and safety.

Function Description:

The Fisher & Paykel DE6060P1 is a vented dryer designed to efficiently dry clothes by circulating heated air. It collects lint released from garments during the drying cycle in a dedicated lint filter, which requires regular cleaning to maintain efficiency and prevent fire hazards. The dryer features a control panel for operation and a drum where clothes are tumbled during drying.

Important Technical Specifications:

While specific technical specifications like power consumption, dimensions, or capacity are not detailed in this cleaning guide, the document implies standard operation for a vented dryer. It highlights the importance of disconnecting the dryer from the power socket before any cleaning, indicating it is an electrically powered appliance. The presence of a lint filter and a warning light for filter cleaning are key functional features.

Usage Features:

The document primarily focuses on post-use and maintenance aspects rather than general operational usage. However, it implicitly describes some usage features:

Door Opening: The dryer has a door that needs to be opened to access the drum and the lint filter.
Power Disconnection: Users are instructed to unplug the dryer from the power socket after each use and before any cleaning, a standard safety protocol for electrical appliances.
Lint Filter Warning Light: A warning light flashes at the beginning of every cycle to remind the user to clean the lint filter, serving as a crucial safety and efficiency reminder.
Condensation Management: Users are advised to wipe around the door to remove any remaining condensation after use, suggesting the dryer may produce some moisture during operation, typical for vented models.

Maintenance Features:

The core of this document is dedicated to the dryer's maintenance features and procedures, which are crucial for its longevity, efficiency, and safe operation.

Routine Post-Use Maintenance:

Unplugging: After each use, the dryer should be unplugged from the power socket.
Door Area Cleaning: Wipe around the door to remove any condensation or foreign matter.
Lint Filter Clearing: The lint filter must be cleared after every load. This is a critical step to prevent lint accumulation, which can become a fire hazard and reduce drying efficiency.

General Cleaning Procedures:

Power Disconnection (Pre-Cleaning): Before any cleaning, the dryer must be disconnected from the power supply.
Control Panel and Outer Surfaces: These surfaces should be wiped with a soft damp cloth and then dried. Users are explicitly warned against using chemical or scouring cleaners, as these can damage the paint and plastic.
Inside of the Dryer (Drum): The inside of the dryer, specifically the drum, should be cleaned occasionally. Any residual dirt or lint should be removed with a damp cloth. A specific warning is given against leaving metal objects in the drum, as this can cause rust.

Lint Filter Cleaning (Detailed Procedure):

The document provides a detailed, step-by-step guide for cleaning the lint filter:

Open the dryer door.
Remove the lint filter: Pull it up and out of its slot.
Open and Clean: Open the filter and wipe its surface clean with your hand. The document explains that lint is formed during wearing and washing and is collected in the filter during the drying cycle.
Replace the filter: Close the lint filter and place it back into the opening, ensuring it is fitted correctly before operating the dryer.

Importance of Lint Filter Maintenance:

The document strongly emphasizes the critical role of the lint filter and its regular cleaning:

Fire Hazard Prevention: Lint accumulation is identified as a significant fire hazard.
Efficiency Maintenance: Built-up lint reduces the dryer's efficiency.
Warning Light: The dryer includes a warning light that flashes at the beginning of each cycle to remind users to clean the filter.

Lint Filter Damage and Replacement:

Warning against damaged filter: Users are explicitly warned not to operate the dryer with a damaged lint filter or without the filter in place, as this will cause damage to the dryer itself.
Contact for Replacement: If the lint filter becomes damaged, users are instructed to contact a Fisher & Paykel Authorised Repairer to arrange for a replacement.

In summary, this manual segment for the Fisher & Paykel DE6060P1 dryer provides essential guidelines for maintaining the appliance, with a strong focus on the lint filter's role in safety and performance. It underscores the importance of routine cleaning and adherence to safety protocols like power disconnection before maintenance.