Fisher & Paykel DE8060P2 Service Manual

DE8060P2
Tumble Dryer
Model No.
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians.Any attempt to service
or repair the product or products dealt with in this service information by anyone else could resultin serious injury or death.
: TL1508S006V1.1
SERVICE MANUSL

Fisher & Paykel DE8060P2 Specifications

General

Capacity	8 kg
Dimensions (H x W x D)	850 x 600 x 670 mm
Number of Programs	13
Noise Level	65 dB
Width	600 mm
Depth	670 mm
Height	850 mm
Color	White
Energy Rating	2 Star

Summary

General Information and Guidelines

Service Guidelines

Servicing procedures and safety checks for technicians.

Caution and Warning Symbols

Explains symbols indicating hazards and instructions.

Function Indicator Symbols

Symbols used in the specification table for functions.

Product Features and Specifications

Key Product Features

Highlights the main characteristics of the tumble dryer.

Technical Specifications

Provides detailed technical parameters and capabilities of the dryer.

Important Safety Instructions

Safety Before First Use

Procedures for safe installation and initial power-up.

Safety During Operation

Guidelines for safe operation and maintenance practices.

Operation Instructions

Control Panel Overview

Explanation of the control panel buttons and display functions.

Using the Tumble Dryer

Step-by-step guide on how to operate the tumble dryer.

Part Identification

Component Identification

Labels and locations of major external and internal parts.

Disassembly Guide

Control Panel Disassembly

Steps to remove and access the control panel.

Heater and Bearing Disassembly

Steps to disassemble the heater and bearing components.

Motor and Fans Disassembly

Steps to remove and access the motor and fan assembly.

Pump Disassembly

Steps to remove and access the water pump.

Front Air Channel Disassembly

Steps for disassembling the front air channel.

Belt Disassembly

Steps to remove and replace the drive belt.

Schematic Diagram

Circuit Interface Diagram

Fault Detection and Troubleshooting

Troubleshooting: Dryer Not Turning On

Steps to diagnose why the dryer fails to power on.

Troubleshooting: Dryer Not Starting

Steps to diagnose why the dryer fails to start cycles.

Troubleshooting: Unsatisfactory Drying

Solutions for poor drying results or long drying times.

Troubleshooting: Dryer Noise

Diagnosing and resolving unusual noises from the dryer.

Error Code Err 2 Diagnosis

Troubleshooting steps for Error Code Err 2 (Drain pump).

Error Code Err 3 Diagnosis

Troubleshooting steps for Error Code Err 3 (NTC near filter).

Error Code Err 4 Diagnosis

Troubleshooting steps for Error Code Err 4 (NTC temp change).

Error Code Err 6 Diagnosis

Troubleshooting steps for Error Code Err 6 (Filter full).

Error Code Err 9 Diagnosis

Troubleshooting steps for Error Code Err 9 (Thermal sensor).

Test Programme

Diagnostic Mode Operation

Instructions for entering and using diagnostic test modes.

Electric Appliance Parameters