25
Using rinse aid
Fig. 25 Rinse aid dispenser
1013
Locking lever
Setting dial
Lid
We highly recommend using liquid rinse aid regularly to achieve the best drying results. Rinse
aid gives a streak-free, sparkling clean look to glass and chinaware. In addition, it prevents metals
from tarnishing.
If you use detergents or tablets that contain rinse aid, we do not recommend using liquid
rinse aid.
To fill the rinse aid dispenser (Fig. 25)
1
Open the rinse aid dispenser by pressing the locking lever.
2
Carefully pour in rinse aid to the MAX mark. Close the lid until it clicks.
3
Carefully wipe up any rinse aid spillages to prevent excess foaming.
To modify the rinse aid setting (Fig. 25)
The dose of the rinse aid is factory-set to 3. You may modify this setting by turning the setting
dial. If you see
watermarks on the dishes: set dosage higher.
streaks on the dishes: set dosage lower.
To Next Page
Loading...
Need help?
General
