28
Twist the filter anti-clockwise to release.
Lift to remove.
Separate the filter cap from the base by
pressing the release buttons and lifting.
Do not attempt to remove the filter by
force as this may cause damage.
Clean under hot water and rinse thoroughly.
Align the filter cap with the notch on the
filter base. Click together to secure.
1
2
1
Removing and cleaning the filter
Replacing the filter
Place the drain filter back into the dishwasher
base. Rotate clockwise to click into place.
2
MAINTENANCE
filter cap
filter base
locating
notch
To Next Page
Loading...
Need help?
General
