34
PROBLEM POSSIBLE CAUSE WHAT TO DO
Water marks
left on glasses
and cutlery
Rinse aid level or dosage
setting is too low.
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting
or try using a wash program with a
higher temperature. Refer to 'Rinse aid'
for information.
Hard water Increase the rinse aid setting and
the amount of detergent. Refer to
'Preferences' and 'Water hardness'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.
TROUBLESHOOTING
To Next Page
Loading...
