- 14 -
SPECIAL FEATURES
Attention Getter –
The ED55/56 is fitted with a feature mainly
intended d to be used in shop displays etc, to
draw attention to the Dryer. This feature
consists of a regular flashing of the LED’s on
the control panel.
To activate the ATTENTION GETTER feature
–
1. Plug ED55/56 into power socket and
switch socket on.
2. Press and hold the LOCK button, then
press the AIRING button.
The LED’s will then start flashing.
To stop the display.
1. Press POWER button.
The display will stop and the dryer is ready
for normal operation.
The ED55/56 can be left in the ATTENTION
GETTER mode indefinitely. It will simply
keep on repeating the cycle. No damage will
result if the dryer is kept in this mode for long
periods of time.
Fault Modes –
Should a fault develop in the Electronic
Control system of the ED55/56 the control
panel will display a particular patter on LED’s
as well as a continuous sounding of the
buzzer.
If this should occur, first turn the dryer off at
the power socket or unplug the dryer. Retry
the dryer.
To Next Page
Loading...
