EasyManuals Logo

Fisher & Paykel OB60 Series Installation Guide

Fisher & Paykel OB60 Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
8DISCARD PACKAGING RESPONSIBLY
9REMOVE THE DOOR
IMPORTANT!
When you remove the oven from the carton be careful not to damage the lower trim.
The trim is important for both ventilation and to ensure the door opens fully without obstruction.
!
WARNING!
124 lb
56 kg
Very Heavy
Do not attempt to lift this
product unassisted.
Lifting unassisted may cause
serious injury.
Remove all packaging and dispose of it
responsibly. Recycle items that you can.
Place the unpacked oven onto wooden blocks or
similar supports to prevent damaging the lower
trim. You may remove the feet, but ensure the
oven does not sit on the lower trim.
Oven may vary.
lower trim feet
Recycle responsibly
IMPORTANT!
Take care, the oven door is heavy.
1 Open the door fully. Locate the two small metal
locking levers on both door hinges either side
(hinges may vary).
2 To release the door from the hinges. Push each locking lever:
OB60 models – down fully.
OB60SD models – up fully.
3 Holding the door on both sides, lift door back
up to 45
o
and carefully pull the door out and
away from the hinges.
OB60 models OB60SD models

Other manuals for Fisher & Paykel OB60 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher & Paykel OB60 Series and is the answer not in the manual?

Fisher & Paykel OB60 Series Specifications

General IconGeneral
BrandFisher & Paykel
ModelOB60 Series
CategoryOven
LanguageEnglish

Related product manuals