Fisher & Paykel OB76DD - Page 5

4
5 CABINETRY DIMENSIONS - SINGLE OVENS
PRODUCT DIMENSIONS
OB76SD
MM
A
Overall height of product 689
B
Overall width of product 760
C
Overall depth of product (excludes handle and dials) 608
D
Depth of oven front and control panel (excludes handle and dials) 39
E
Depth of chassis (does not include oven front) 569
F
Height of chassis 675
G
Depth of door (open) (measured from front of door) 530
H
Overall width of chassis 720
I
J
Electrical supply
H
B
C
A
D
G
F
E
M
K L
16-20 mm
2 mm
min.
39 mm
16-20 mm
2 mm
min.
39 mm
PLAN
PROFILE
CABINETRY DIMENSIONS
OB76SD
MM
I
Minimum inside width of cavity 724
J
Overall width of cabinetry 764
K
Minimum inside height of cavity 681
L
Overall height of cabinetry 693
M
Minimum inside depth of cavity
Proud install
Flush install
575
613
Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as
per the cooktop manufacturer’s instructions.
IMPORTANT!
FLUSH INSTALLATION
The depth of the control panel (D)
is larger than conventional ovens.
Ensure you have created a
39 mm recess in cabinetry.
If flush installing, you need to
replace the lower trim with the
supplied long trim at the base
of the oven. Refer to Step 11 for
instructions.
IMPORTANT!
Make sure the cavity is completely
sealed with no gaps.
This is to ensure the oven cooling
system functions correctly.
PROUD INSTALL
FLUSH INSTALL