Fisher & Paykel OR36S - Replacing the Oven Broil Burner Injector

26
Replacing the oven broil burner injector
1 Gently unlock, the safety valve probe (V) and the ignition electrode (E) from
the burner. Take care not to damage the probe and the ignition electrode.
2 Unscrew and remove the burner securing screw (A).
3 Withdraw the burner as shown beside.
4 Using a 9/32" (7mm) box spanner, unscrew the injector and replace it with a
new one selected in accordance with the ‘Injectors table’.
5 Replace the burner and other components.
IMPORTANT!
z
Ensure the safety valve probe (V) and the ignition electrode (E) are
replaced correctly.
z
Check the correct operation of the safety valve and the ignition electrode.
Injector
GAS CONVERSION (GAS GAS MODELS ONLY)
Anchorage
clip
E
E
Anchorage
clip
V
V
A
Ignition
electrode
Safety
valve
probe