EasyManua.ls Logo

Fisher & Paykel OR90SDBGFX3 - Replacing the Oven Light Bulbs

Fisher & Paykel OR90SDBGFX3
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing the Oven Light Bulbs
The oven light bulbs (12V/20 W halogen) have a very long life, but if you should need to replace one, use only a
replacement bulb purchased from your nearest Fisher & Paykel dealer and follow these steps.
Oven bulb replacement is not covered by your warranty.
1. Allow the oven to cool down, then turn
it off at the mains power supply (wall switch).
2. Remove any oven shelves
that may get in the way.
3. Using a flat-head screwdriver, twist and
lift the retainer clip upwards to release the glass
cover.
Hold the glass cover to prevent it falling.
4. Carefully lift the glass cover out of the retaining
bracket in the back and pull out the faulty bulb.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX…
Updated: Thu, 20 Feb 2020 06:37:43 GMT
Powered by
10

Other manuals for Fisher & Paykel OR90SDBGFX3

Related product manuals