Fitting and Removing the Sliding Shelf Supports
When fitting the sliding shelf supports, make sure that you fit:
• the catalytic panels first. See ‘Fitting the Catalytic Panels’ .
• the side racks.
• the slides to the top wire of a shelf position.
• both sides of each pair of slides.
• both slides on the same level.
Remove the side racks first to make removing the sliding shelf supports easier.
Fig. 37 Fitting the sliding shelf support
Fig. 38 Removing the sliding shelf supports
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX…
Updated: Thu, 20 Feb 2020 06:37:43 GMT
Powered by
8
To Next Page
Loading...
