Need help?Do you have a question about the Fisher & Paykel PHASE 6 Series 11 and is the answer not in the manual?
General| Brand | Fisher & Paykel |
|---|---|
| Model | PHASE 6 Series 11 |
| Category | Washer |
| Language | English |
Identifies machine phase, size, model, front panel colours, and components.
Details finish, dimensions, load capacity, and water consumption.
Covers water fill temperatures, basket speed, wash motor, and pump motor.
Details valves, electric supply, dispenser, and lid lock.
Explains air-cooled electronics and the machine's standby mode function.
Details water temperature sensing, water valves, and stator specifications.
Describes pump operation, size setting mode, and lid lock.
Explains the lid lock function and the size setting mode procedure.
Instructions for entering the diagnostic mode for GW Ecosmart.
Smartdrive diagnostic table and explanation of user warnings.
Details insufficient hot/cold water and no water warnings.
Explains overloaded product and out of balance warnings.
Details suds warnings, restart/recycle modes, and demonstration mode.
Procedures for drain pump and water valve tests.
How to enable/disable restart, recycle features, and hot tub flag.
Illustrates the electrical connections of the washing machine components.
Expected voltage and resistance readings for the motor controller.
Readings for RPS, Display, Thermistor, Lid Lock, and Diverter Valve.
Lists and describes various fault codes for different phases and components.
To Next Page