What to do if my Fisher & Paykel QuickSmart is not spinning properly?
If your Fisher & Paykel Washer isn't spinning properly, it could be due to an unbalanced load. Pause the washer and manually redistribute the clothes. Also, check that the washer is level and doesn't rock in any direction.
How to fix a Fisher & Paykel QuickSmart Washer that is not turning on?
If your Fisher & Paykel Washer isn't turning on, there are a few things to check. First, make sure the power is switched on at the wall; try switching it off, waiting 60 seconds, and then switching it back on. Next, verify your household power supply is working by plugging in another electrical appliance. Finally, the Keylock feature might be activated; try holding down the ‘POWER’ button for 2 seconds.
Why is my Fisher & Paykel Washer not filling with water?
If your Fisher & Paykel Washer isn't filling with water, start by checking that both the hot and cold inlet taps are turned on. Next, inspect the inlet hose filters for any blockages and clear them. Also, check if the ‘Delay Start’ function is set.
How to reduce noise from my Fisher & Paykel Washer?
If your Fisher & Paykel Washer is making unusual noises, it's likely due to an unbalanced load. Try pausing the washer and redistributing the items inside.
How to prevent creasing in my Fisher & Paykel QuickSmart?
To minimize creasing in your Fisher & Paykel Washer, avoid overloading it by reducing the load size. Select the ‘Delicate’ cycle, as it's designed to reduce creasing. Also, try selecting a lower spin speed and wash temperature.
What to do if my Fisher & Paykel QuickSmart Washer is filling continuously?
If your Fisher & Paykel Washer is filling continuously, make sure the drain hose is correctly installed in the standpipe or tub. To prevent siphoning, ensure the drain hose does not extend more than 20 mm from the end of the hose guide.
How to improve soil removal in my Fisher & Paykel QuickSmart Washer?
If your Fisher & Paykel Washer isn't effectively removing soil, consider whether you're using the most appropriate wash cycle for the amount of dirt. Also, check the detergent package for the manufacturer's recommended dosage and ensure you're using enough for the load size and soil level.
Why does the spin speed sound slower than normal on my Fisher & Paykel QuickSmart?
If the spin speed of your Fisher & Paykel Washer sounds slower than normal, it may be continually going out of balance due to unevenly distributed clothes in the bowl. Also, ensure an appropriate water level is selected for the load size.
General| Brand | Fisher & Paykel |
|---|---|
| Model | QuickSmart |
| Category | Washer |
| Language | English |
Details on connecting the washing machine to the power supply.
Importance and steps for leveling the washing machine.
Instructions for drain hose placement and important considerations.
Important safety precautions for using the washing machine.
Critical step to remove transit bolts before operation.
Guidance on connecting inlet hoses to the water supply.
Technical specifications for WashSmart and QuickSmart models.
Description of the main control dial for cycle selection.
Explanation of the door locking mechanism for safety.
How to add or remove garments during a cycle.
Recommended detergent types (low sudsing).
Step-by-step guide to cleaning the pump filter.
Explains common error codes and user-correctable issues.
Troubleshooting for a locked door.
What to do when a fault code is displayed.
Troubleshooting for the machine not powering on.
Troubleshooting for issues with starting the fill cycle.
Troubleshooting for the washer stopping mid-cycle.
Troubleshooting for improper spinning.
Troubleshooting excessive vibration.
Troubleshooting continuous draining during filling.
Troubleshooting for the washer not draining properly.
To Next Page