maintain the water level due to the release of air trapped in the
garments.
• Out of balance loads, tangling or splash-over can be caused by selecting
a water level that is too high.
Water level guide on agitator
Wash Temp
WashSmart™ Eco washer and WashSmart™ washer offers 5 wash temperatures, and an additional setting,
‘Controlled Cold’.
The wash temperature selected is used in the detergent activating part of the wash.
If Eco-Active™ is ‘On’ the temperature will be colder for the second part of the wash. When Eco-Active™ ‘Off’ is
selected, the bowl will fill with the wash temperature selected.
WashSmart™ Eco washer: for the ‘Allergy’ cycle the bowl will fill with water at the temperature selected by the
user. There is no Eco-Active™ section in the wash cycle.
The temperature of cold tap water varies widely depending on your location and the season. We have developed
‘Controlled Cold’, which adds a small amount of warm water, when necessary, to raise your cold water wash to
20°C for a more effective wash (refer to the ‘Changing pre-set options’ section for detail on how to set ‘Controlled
Cold’ as the default temperature for your cold water wash).
QuickSmart™ washer offers 3 wash temperatures; Cold and Hot will be the temperature of the water supply.
https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/WashSmart/WA7060G2/User_Guide_WA7060G2/18_Wash_opti…
Updated: Thu, 16 Feb 2023 00:31:39 GMT
Powered by
2
To Next Page
Loading...
Need help?
General
