Fisher & Paykel RS36W80 series - Product and Cavity Dimensions; Product Dimensions; Cavity Dimensions; Door Opening and Clearance Dimensions

8
5 PRODUCT AND CAVITY DIMENSIONS
PRODUCT DIMENSIONS
inches (mm)
D
Overall height of product* (does not include front panels) 79 7/8” (2028)
E
Overall width of product (does not include front panels) 35 1/16” (890)
F
Minimum cabinetry gap clearance from edge of custom panels** 5/32” (4)
G
Overall depth of product (excl. front door panels) 23 3/4” (603)
H
Depth of toe kick (measured from front of door panels***) 4 3/4” (120)
I
Height of stainless steel toe kick**** 4” (102)
J
Depth of product front panels (excludes handles)*** 3/4” (19)
* Includes mounted feet.
** Refer to ‘Custom door panel dimensions’ section.
*** Door panels to be manufactured and fitted by cabinetmaker, maximum thickness 3/4” (19mm).
**** Stainless steel toe kick provided with appliance. Alternatively customers can supply their own toe kick, height
4–6” (102–152mm).
CAVITY DIMENSIONS inches (mm)
A
Overall height of cavity 80 – 84” (2032 – 2134)
B
Overall width of cavity 36” (914)
C
Overall depth of cavity* 24 3/4” (629)
Total front panel width with required gaps at sides = 36” (914mm). (Refer to ‘Custom door panel dimensions’
section – panel width + 2 x
F cabinetry gaps).
* Assumes a door panel thickness of 3/4” (19mm).
RS36W80RJ or RS36W80RJC DCS models shown only.
When designing custom door panels, these are only available for non-Water dispensing models.
PROFILE VIEWFRONT VIEW
Flush with front
of cabinetry
E
B
H
C
A
A
I
J G
C
B
F
F
D
F
Note: Shown with custom panel
and handle attached to fridge
E
B
H
C
AA
I
J G
C
B
F
F
D
F
Note: Shown with custom panel
and handle attached to fridge
E
B
H
C
AA
I
J G
C
B
F
F
D
F
Note: Shown with custom panel
and handle attached to fridge
PLAN VIEW
Note: shown with custom
panel and handles attached
to fridge
E
B
H
C
AA
I
J G
C
B
F
F
D
F
Note: Shown with custom panel
and handle attached to fridge
5/32” (4mm)