Fisher & Paykel RS36W80 series - Custom Door Panel Dimensions; Custom Panel Dimensions

14
7 CUSTOM DOOR PANEL DIMENSIONS
RS36W80J
RS36W80JC
CUSTOM PANEL DIMENSIONS inches (mm)
A
Height of top door panel 45 5/16–49 5/16” (1150–1252)
B
Width of top door and bottom drawer panel 35 11/16” (906)
C
Height of bottom drawer panel* 28 3/8 – 30 3/8” (722 – 772)
D
Height from bottom of product to top of bottom drawerpanel 34 3/8” (874)
E
Gap between top door panel and bottom drawer panel 5/32” (4)
F
Height of toe kick panel* 4 – 6” (102 – 152)
G
Depth of custom panels min. 5/8, max. 3/4” (min. 16, max. 19)
Maximum weight of top door panel** 44 lbs (20kg)
Maximum weight of bottom drawer panel** 24 1/4 lbs (11kg)
Custom door panels to be manufactured and fitted by cabinetmaker.
Door handle kit is available as an optional accessory.
* Stainless steel toe kick, height 4” (102mm) is supplied with the appliance. For integrated installation, a custom toe kick 4 – 6”
(102–152mm) can be manufactured and fitted by cabinetmaker. The bottom grille can be reduced to allow for a higher toe kick.
Adjust the height of the bottom drawer panel accordingly.
** Includes weight of handle.
RS36W80RJ or RS36W80RJC models shown only.
When designing custom door panels, these are only available for non-Water
dispensing models.
PROFILE VIEW
ISO VIEW PROFILE VIEW
CUSTOM PANEL DIMENSIONS
Note: Top trim supplied for
84" installation
f
D
A
B
c
e
A
d
e
g
c
ISO VIEW PROFILE VIEW
CUSTOM PANEL DIMENSIONS
Note: Top trim supplied for
84" installation
f
D
A
B
c
e
A
d
e
g
c
Note: top trim supplied for
84” (2134mm) installation
ISO VIEW