Fisher & Paykel RS36W80 series - Attach Side Base Brackets and Door Studs

19
WARNING!
Take care when working with the appliance outside of the finished enclosure, as the
appliance is not secured and has the possibility of tipping forward. Tipping of appliance
can lead to serious injury or death.
1
Ensure all external packaging material is removed from the appliance before installation.
2
At the base LH side of the appliance attach the LH side bracket to the dedicated
threaded holes and secure with screws x2 (M5 x 8 countersunk Phillips screws).
Repeat this process on the RH side of the appliance.
LH orientation
3
Secure M8 studs into the refrigerator
doors, ensure the open end faces the top
and the studs go all the way in.
Repeat this process for all
refrigeratordoors.
4
Loosely screw (1–2 turns) M5 x 10 pan
head Phillips screws into doors.
Repeat this process for all
refrigeratordoors.
9 ATTACH SIDE BASE BRACKETS AND DOOR STUDS
1 – 2 turns