Fisher & Paykel Smartload DEGX1 - Clothes Take too Long to Dry

- 67 -
8.6 Clothes Take Too Long to Dry
Are the
conductivity
contacts clean and
connected
correctly?
Is a fault
code
displayed?
Refer to Section
4.2
Has the
correct cycle
been chosen
for the type of
clothes?
Is cabinet
vented
externally?
Advise customer to
use correct cycle
Advise customer
on correct venting
methods
Has correct
spin speed
been used in
washing
machine?
Advise customer to
use correct spin
speeds to aid
drying
Is the venting
clear, not too
long, not too
many bends
etc?
Clear restrictions.
Advise customer
on correct venting
methods.
Yes
Yes
Yes
Yes
No
No
No
No
Are the inlet
grill & burner
inlet grill free
of lint?
Are the lint
filter &
exhaust
sensor free o
f
lint?
Is heater
operating?
Yes
Yes
Yes
Clean
Clean and/or
reconnect correctly.
Check as per
Section 5.4.5
Clean & check
sensor as per
Section 5.2.8
Refer Section 8.2
(electric) or Section
8.3 (gas)
Fit new seals.
Refer Sections
6.20 and 6.26
Are inlet &
outlet duct
seals OK?
Yes
No
No
No
No
No
No
Refer to installation
instructions
Yes