Need help?Do you have a question about the Fisher & Paykel DH8060P3 and is the answer not in the manual?
General| Brand | Fisher & Paykel |
|---|---|
| Model | DH8060P3 |
| Category | Dryer |
| Language | English |
Explains dryer symbols, fire hazards, and importance of reading the manual.
Guidance on safely moving the dryer before installation.
Steps for safely removing the dryer from its packaging.
Specifies the physical dimensions and required clearances for the dryer.
Details the ways the dryer can be installed, freestanding or stacked.
Instructions on how to ensure the dryer is level for optimal performance.
Information on water management and connecting the drain hose.
Details the electrical requirements and connection procedures for the dryer.
Final steps for installation, including running a test cycle.
A checklist to ensure all preparations are complete before the first dry.
Explains control panel buttons, display, and progress lights.
Explains timed cycles, airing/cool down, and time to go display.
How to activate, deactivate, and use the control panel's keylock function.
Details various drying cycles, their purpose, load capacity, and settings.
Guidance on sorting laundry for optimal drying and fabric care.
Instructions on loading, drying times, and managing lint.
How to use the drying rack and associated cycles.
Step-by-step guide to starting a drying cycle and managing it.
How to select dryness levels and drying temperatures for cycles.
How to use Wrinkle Free options and manage the cycle signal.
Instructions on setting a delayed start for drying cycles.
Steps to program the dryer to remember preferred cycle settings.
How to reset the dryer's settings back to factory defaults.
Post-use, exterior, interior cleaning and general filter info.
Detailed steps for cleaning the door lint filter.
How to clean the condenser filter, foam, and evaporator grid.
Step-by-step guide for cleaning the condenser filter.
Instructions for cleaning or replacing the filter foam.
How to safely clean the evaporator grid.
Procedures for emptying the water tank.
How to clean the laundry sensors for accurate drying.
Information on dryer prompts and initial troubleshooting steps before calling service.
Steps to take when the dryer displays a fault code.
Addresses power, heating, door, and general operational issues.
Solutions for long drying times, unsatisfactory results, and environmental impacts.
Troubleshooting drainage, leaks, and water in the drum at cycle end.
Solutions for noise, vibration, and fabric creasing issues.
Addresses problems concerning lint buildup and fabric damage during drying.
Solutions for dye transfer and clothes tangling issues.
Details warranty coverage, duration, and lists exclusions.
Specifies intended use environment and limitations for product warranty.
Pre-service checks, contact details for NZ/AU, and registration.
Instructions on how to register the product for warranty and support.
To Next Page