Fisher & Paykel DH8060P3 - Evaporator Grid Cleaning

34
To clean the evaporator grid:
With the condenser filter removed you will be able to see the evaporator grid.
Cut Hazard. The surface of the evaporator has sharp edges and contact may result in
injury. Handle with care when cleaning the grid andalways keep blades away from fingers
andbody.
Ifthesurface of the evaporator grid is
dirty, clean it carefully with avacuum
cleaner using a dusting brush or anarrow
crevice tool. Begentle and do not bend the
finemetalfins.
1
Replace the condenser filter.
Turn the four condenser filter lock levers to
lock the condenser filter back inplace. Ensure
the locksare engaged securely.
Close the condenser filter cover.
2
CARING FOR YOUR DRYER