27
1
Delay Start
The
DELAY START option can delay the start of the dry cycle between 5 minutes and
12hours.
Press
MORE to increase the delay time, and
LESS to decrease the time, or turn DELAY
START
off.
Avoid using
DELAY START for damp, non-colourfast items as this may cause dye run
to occur. DELAY START is not available for QUICK 30 and FRESHEN cycles.
2
Press to confirm your selection and start
the countdown. The display screen will show
the time until the cycle is set to begin.
DRYING OPTIONS
To Next Page
Loading...
