Fisher 1061 User Manual

www.Fisher.com
Fisher™ 1061 Pneumatic Piston Rotary Actuator
with Style H & J Mounting Adaptations
Contents
Introduction 1.................................
Scope of Manual 1.............................
Description 2.................................
Specifications 3...............................
Educational Services 3.........................
Installation 3..................................
Actuator Mounting 4..........................
Pressure Connections 11.......................
Adjustment 11.................................
Principle of Operation 12........................
Maintenance 12................................
Disassembly 13...............................
Assembly 14..................................
Changing Actuator Mounting 16..................
Changing Styles 16............................
Changing Positions 17.........................
Parts Ordering 19...............................
Repair Kits 19..................................
Parts List 19...................................
Figure 1. Fisher 1061 Actuator
W4142
W4257‐1
H Mounting Adaptation
J Mounting Adaptation
and Fisher 3610JP Positioner
Introduction
Scope of Manual
This instruction manual includes installation, adjustment, maintenance, and parts ordering information for the Fisher
1061 pneumatic piston rotary actuator (sizes 30, 40, 60, and 68) with H and J mounting adaptations (see figure 1).
Instructions for the positioner, accessories, and, if used, the auxiliary handwheel actuator are covered in separate
instruction manuals.
Do not install, operate, or maintain a 1061 actuator without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is important to
carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings. If you
have any questions about these instructions, contact your Emerson Process Management sales office
before
proceeding.
Instruction Manual
D100325X012
1061 H & J Actuator
January 2016

Fisher 1061 Specifications

General

Brand	Fisher
Model	1061
Category	Controller
Language	English

Summary

Introduction

Scope of Manual

Provides an overview of the manual's content and coverage for the 1061 actuator.

Description

Specifications

Educational Services

Information on available courses for 1061 actuators and other Emerson products.

Installation

Actuator Mounting

Step-by-step instructions for physically connecting the actuator to valves or other equipment.

Pressure Connections

Adjustment

Principle of Operation

Maintenance

Disassembly

Step-by-step instructions for taking apart the actuator for inspection or repair.

Assembly

Procedures for reassembling the actuator after inspection or repair.

Changing Actuator Mounting

Changing Styles

Procedures to switch between H and J mounting adaptations.

Changing Positions

Instructions for repositioning the actuator housing relative to its mounting.

Parts Ordering

Repair Kits

Details on available repair kits and their contents for different actuator sizes.

Parts List

A comprehensive list of actuator components with key numbers for identification.