Lit. No. 41298, Rev. 01 February 15, 2019
26
JOYSTICK CONTROL WITH SECURITY GUARD™ SNOWPLOW ANTI-THEFT SYSTEM
Light Flash Indicators
POWER – Red Function
Off Control is OFF
Solid On Control is ON and active
Slow Flash No communication
Fast Flash Snowplow is locked – enter 4-digit
security code to unlock
FLOAT – Green Function
Solid On Float function is active
Fast Flash Security code activation in progress
Additional Notes
• The SECURITY GUARD system requires
any HT Series™ control (other than the one
with the assigned 4-digit security code) to
enter the security code before the snowplow
can be activated. Once the security code is
established, the SECURITY GUARD system
recognizes that a control with the same
security code is attached, and does not require
a manual unlock to activate the snowplow. The
system will recognize the control as "safe" and
will automatically unlock.
• The SECURITY GUARD system is only fully
functional with joystick controls PN 49700.
• In the event that a snowplow is locked and
cannot be manually unlocked or reset, contact
your Authorized Dealer.
• REMINDER: Record your security code for
future reference.
To Next Page
Loading...
