Need help?Do you have a question about the Fisher M-Scope CZ-5 Quicksilver and is the answer not in the manual?
General| Brand | Fisher |
|---|---|
| Model | M-Scope CZ-5 Quicksilver |
| Category | Metal Detector |
| Language | English |
Explains the meter display and audio tones for identifying different target types.
Details how to pinpoint targets and obtain approximate depth readings for coin-sized objects.
Details the initial control settings for quick operation, enabling immediate searching.
Guides on unpacking, assembling, and adjusting the detector's stem for proper length and coil angle.
Covers securing the search coil cable and achieving the correct search posture for comfortable operation.
Explains the function of the GROUND control for mineralization and the DISC control for target identification.
Specifies the recommended control settings for turning on the detector and preparing for search.
Explains the critical nature of ground balancing and details the pushbutton method for accurate adjustment.
Describes the bobbing method for ground balancing, useful in certain conditions for fewer false signals.
Covers ground balancing, mode selection, and initial control settings before starting a search.
Details how to walk, sweep the coil parallel to the ground, and overlap sweeps for effective detection.
Explains false signals caused by trash, including one-way and disappearing signals, and how to interpret them.
Covers deep targets, electrical interference, and mineralized soil as sources of false signals.
To Next Page
